3M™ Adhesive Transfer Tape 6035PC A Guide

3M™ Adhesive Transfer Tape 6035PC is a product manufactured by 3M. It is a clear, double-coated adhesive transfer tape that is used for bonding a wide variety of materials, including metals, plastics, and fabrics. The tape is made from a clear polyester film carrier with a clear acrylic adhesive on both sides. The adhesive is designed to provide a strong bond and good resistance to temperature and chemicals.

The tape is used in a variety of applications, including:

• Attaching nameplates and labels
• Bonding gaskets and seals
• Mounting signs and displays
• Securing and reinforcing parts

The specifications of 3M™ Adhesive Transfer Tape 6035PC include:

• Adhesive Type: Clear Acrylic
• Carrier/Backing: Clear Polyester Film
• Total Thickness: 4 mils (0.1 mm)
• Adhesive Thickness: 2 mils (0.05 mm) on each side
• Adhesion to Steel: 45 oz/in (5 N/100 mm)
• Tensile Strength: 15 lb/in (26 N/100 mm)
• Elongation: 150%
• Operating Temperature Range: -40°F to 250°F (-40°C to 121°C)
• Shelf Life: 2 years at 70°F (21°C) and 50% relative humidity

For use with 3M 6035PC, 3M suggests the following application procedures:

• Surface preparation: The surfaces that will be bonded should be dry, clean, and devoid of any pollutants such as grease or oil.
• Application options include utilising a squeegee, roller, or automated machinery to apply the tape.
• Remove the release liner after applying the tape firmly to the surface.
• Before or after application, the tape can be die-cut or slit to the required shape and size if necessary.

Prior to full application, it’s always a good idea to test the tape on a small portion of the surface to check compatibility and the necessary stickiness.

It’s also advised to refer to the product’s technical datasheet for further information and to abide by the handling, storage, and safety instructions.